Descrizione
SPMXSE1150 Firma 150A Brushless Smart ESC 3S-6S 1/8 Spektrum
Regolatore 150 Ampere Brushless Smart ESC Lipo 3-6S scala 1/8
Con Firma Smart ESC sei connesso al tuo veicolo senza dover installare componenti aggiuntivi. Non sono necessari cavi, moduli o connessioni aggiuntivi. Una Smart ESC offre la possibilità di richiamare dati di telemetria come velocità, temperatura, tensione e capacità della batteria. Gli Smart ESC non solo registrano i dati, ma li inviano anche al trasmettitore in tempo reale invece di salvarli solo per analisi successive. È possibile regolare le impostazioni secondo le proprie necessità per migliorare le prestazioni.
Impermeabile: Il design resistente alle intemperie e impermeabile del controller intelligente Spektrum Firma gli consente di funzionare su quasi tutti i terreni e in quasi tutte le condizioni. Con gli Smart ESC guidi attraverso polvere, fango, neve e acqua.
Connettori IC compatibili con EC: I controller Firma dispongono di connettori per batteria della serie IC. I connettori della serie IC sono stati progettati per fornire una connessione più forte, maggiore resistenza al calore e facilità di installazione. Quando si utilizza una batteria Spektrum Smart con connessione IC3 o IC5, il controller può ricevere e inviare dati di telemetria della batteria. I connettori EC3 e EC5 sono compatibili con gli Smart ESC per il normale funzionamento.
Un cavo per la telemetria: Non è necessario collegare più cavi, sensori, moduli e connessioni. Con gli ESC Firma la telemetria trasmette una varietà di dati in tempo reale direttamente al trasmettitore, inclusi giri motore, tensione della batteria, temperatura, bilanciamento delle celle e velocità, tramite un cavo. NOTA: Vedere la tabella di compatibilità per ulteriori informazioni.
Dati della batteria con tecnologia Smart: In connessione con una batteria Spektrum Smart LiPo, il tuo Firma ESC offre il vantaggio della telemetria della batteria, che viene trasferita automaticamente al tuo telecomando in tempo reale. Sullo schermo del trasmettitore si ottengono informazioni utili come il numero di cicli, la capacità della batteria utilizzata e rimanente, la tensione delle singole celle e altro ancora.
Opzioni di programmazione: Sono disponibili diverse opzioni di programmazione. La programmazione dei pulsanti può essere facilmente utilizzata. Con la scatola di programmazione Smart ESC, puoi adattare facilmente le impostazioni alle condizioni di guida direttamente in pista. È inoltre disponibile una App di aggiornamento e programmazione USB Smart Link facile da usare.
Processore ARM-M4 veloce e potente: Il processore M4 a 32 bit della ESC genera un segnale con una risoluzione maggiore e un controllo del motore più preciso.
Caratteristiche principali:
Telemetria intelligente all-in-one
Processore ARM-M4 a 32 bit veloce e potente
Impermeabile
Diverse opzioni per una facile programmazione: Smart ESC, USB SmartLink, programmazione con Tx
Protezione multipla: Sovracorrente, bassa tensione LiPo, surriscaldamento, fail-safe
Compatto per una facile installazione
Pronto per l’installazione, nessuna saldatura richiesta
Dissipatore di calore in alluminio con ventola
BEC regolabile ad alte prestazioni
Firmware aggiornabile tramite Smart ESC Programmer Box e l’applicazione SmartLink per PC
Connettori IC altamente resistenti al calore e compatibili con connettori EC
Il set comprende:
Spektrum Smart ESC Firma 150 Ampere
Adesivi Spektrum Smart
Accessori necessari non inclusi:
Trasmettitore e ricevitore di superficie Spektrum
Batteria Lipo Spektrum Smart Technology
Caratteristiche tecniche:
Corrente continua 150A
Corrente di picco 950A
Adatto per motore sensorless Brushless
Applicazione: scala 1/8 On-Road, Buggy, SCT
Adatto per Lipo: 3-6S Lipo 11,1-22,2V
BEC: 6V a 5 Ampere
Dimensioni: 60x58x39mm
Peso: 238 gr
Connettore: IC5, EC5 compatibile
Connettore Motore: 4mm gold bullet
Ventola di raffreddamento integrata
Costruzione: Nylon e alluminio
Smart all-in-one telemetry
Fast, powerful 32-bit ARM M4 processor
Waterproof
Multiple options for easy programming:
Button programming
Smart ESC Programming Box
SmartLink USB Updating and Programmer application
Multi-point protection:
Over-current protection
Automatic LiPo low-voltage cutoff
Thermal protection
Failsafe protection
Developed and designed by Spektrum™ engineers, in partnership with the industry’s leading ESC manufacturer
Compact for easy installation in most applications
Ready to install — no soldering required
Rugged plastic case with mounting tabs
Aluminum heat sink for high efficiency
Cooling fan
Adjustable high-power BEC
Firmware updatable through the Smart ESC Programming Box
High heat-resistant IC™ connectors, backwards compatible with EC™ connectors
Limited 1-year warranty
Auto Cutoff Yes
Battery Connector IC5
Battery Input Lead IC5, EC5 compatible
BEC Yes
BEC Continous Current 5A
BEC Type Linear
BEC Voltage 6V
Brakes Yes
Forward Yes
Input Voltage 3S – 6LiPo
Low-Voltage Cutoff Programmable Yes
Maximum Burst Current 950A
Maximum Continuous Current 150A
Motor Connector 4mm Bullet
Motor Output Lead 5.9″ (150mm) 10AWG
Overload Protection Yes
Product Height 1.5″ (38.5mm)
Product Length 2.3″ (58mm)
Product Weight 8.4oz (238g)
Product Width 1.9″ (47.5mm) without tabs, 2.3″ (59.5mm) with tabs
Programmable Yes
Reverse Yes
Smart Technology Smart ESC
Like every component in the Spektrum™ Smart ecosystem, Firma™ Smart ESCs combine “plug-and-play” simplicity with the ability to communicate with other Smart electronics — together, creating the best-performing RC system for your vehicle imaginable.
Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.
With Firma Smart ESCs, you’ll be better connected to your vehicle than ever before — without installing extra components that all work independently of each other. You won’t need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity.
Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You’re able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!
Needed to Complete
Spektrum™ Surface Receiver
Spektrum Smart Technology LiPo Battery
Spektrum Transmitter
What’s in the Box?
(1) Spektrum™ Firma™ Smart ESC
(1) Spektrum Smart sticker sheet
(1) Product Manual
WATERPROOF
The all-weather, waterproof design of Spektrum™ Firma™ Smart ESCs allows them to perform in nearly any terrain under almost any conditions. Firma ESCs keep you going through dust, gravel, snow, and water.
EC3™/EC5™ BACKWARDS COMPATIBLE EC3™/EC5™ BACKWARDS COMPATIBLE
Firma™ ESCs feature IC™ series battery connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. When used with an IC3™ or IC5™ connector-equipped Spektrum™ Smart battery, the ESC can receive and transmit battery telemetry data. EC3 and EC5 are also compatible with Firma ESCs for basic operation and ESC telemetry.
ONE-WIRE TELEMETRY
No need to connect multiple wires, sensors, modules, and links. With Firma™ ESCs, simple one-wire telemetry transmits a wide range of data directly to your transmitter in real time, including RPM, voltage, temperature, balance, capacity, and speed.*
*See compatibility chart for more information.
SMART TECHNOLOGY BATTERY DATA SMART TECHNOLOGY BATTERY DATA
When used with a Spektrum™ Smart LiPo battery, your Firma™ ESC provides you with the benefit of battery telemetry that’s automatically transmitted to your compatible Spektrum radio in real time. On your transmitter screen you’ll be presented with helpful information such as number of cycles, battery percentage, individual cell voltage and more!
MULTIPLE PROGRAMMING OPTIONS MULTIPLE PROGRAMMING OPTIONS
Multiple programming options are available. Button programming can be used with nothing more needed. Using the Smart Firma™ ESC Programming Box, you can easily change settings at the track to suit driving conditions. An easy-to-use Smart Link USB Updating and PC Programmer app is also available.
FAST, POWERFUL M4 PROCESSOR FAST, POWERFUL M4 PROCESSOR
The Firma™ ESCs’ 32-bit M4 processor produces higher resolution signal input and more accurate motor output.
Recensioni
Ancora non ci sono recensioni.